- SKU:
- 10128303
The EVOlution GT for the Nissan 370Z is not only ideal for turbocharged VQ37s but also makes great power for normally aspirated applications. Dyno test on a N/A car gained as much as 16whp / 19ft-lbs, with more expected for turbo use. The dual cat-back exhaust progresses from a 2.5” Y that transitions smoothly into 3" X-pipe crossover, to dual resonator for equalizing exhaust pressures and improved sound control. Aggressive dual EVO muffler canisters are angled to match the Z looks while making room for the factory EVAP canister. GReddy single-wall slash tips finish off the system under the factory bumper cut-outs. Like all GReddy EVOlution GT systems the fully hand-welded 304 Stainless-Steel exhaust carries a Limited Lifetime Warranty.
Note: not compatible with Nismo bumper.
Chassis: Z34
Engine: VQ37HR
Type: full dual cat-back with X-pipe
Number of pieces: 4pcs.
Piping: 2x 63.5mm (2.5") to 2x 76 mm (3.0")
Tip(s): T115 mm (4.5")
Gasket(s): 3.0" oval (qty: 3 included) replacement
Resonator: yes, 2x
Notes: * No EVAP relocation necessary
Weight: 51.4 lbs (stock 57.2lbs)
Sound level: 99/100 dB(a) @4500RPM
Dyno Chart
HP: 16 hp
TRQ: 19 ft-lbs
0 Reviews Hide Reviews Show Reviews
The EVOlution GT for the Nissan 370Z is not only ideal for turbocharged VQ37s but also makes great power for normally aspirated applications. Dyno test on a N/A car gained as much as 16whp / 19ft-lbs, with more expected for turbo use. The dual cat-back exhaust progresses from a 2.5” Y that transitions smoothly into 3" X-pipe crossover, to dual resonator for equalizing exhaust pressures and improved sound control. Aggressive dual EVO muffler canisters are angled to match the Z looks while making room for the factory EVAP canister. GReddy single-wall slash tips finish off the system under the factory bumper cut-outs. Like all GReddy EVOlution GT systems the fully hand-welded 304 Stainless-Steel exhaust carries a Limited Lifetime Warranty.
Note: not compatible with Nismo bumper.
Chassis: Z34
Engine: VQ37HR
Type: full dual cat-back with X-pipe
Number of pieces: 4pcs.
Piping: 2x 63.5mm (2.5") to 2x 76 mm (3.0")
Tip(s): T115 mm (4.5")
Gasket(s): 3.0" oval (qty: 3 included) replacement
Resonator: yes, 2x
Notes: * No EVAP relocation necessary
Weight: 51.4 lbs (stock 57.2lbs)
Sound level: 99/100 dB(a) @4500RPM
Dyno Chart
HP: 16 hp
TRQ: 19 ft-lbs